Quadra-Fire CB1200M-MBK B. Top Vent Adapter Installation, CB 1200 Pellet Stove, See Figure

R

CB 1200 Pellet Stove

B. Top Vent Adapter Installation

3 to 3 inch Top Vent Adapter

3 to 6 inch Top Vent Offset Adapter

Installing the Top Vent Adapter

1.Put a layer of high temperature silicone on the 3 inch (76mm) exhaust outlet.

2.Slide the top vent adapter onto the rear exhaust outlet and adjust the assembly to a vertical position.

3.Drill 4 holes with #26 drill bit (provided) into the back of the appliance using the outer shield as a pattern (make sure the assembly is vertical). Figure 19.1

4.Install the 4 mounting screws.

5.Install the vent pipe into the top vent adapter (be sure to silicone all joints).

C.Rear Vent and Rear Vent to Top Vent Adapter Installation

Clean-Out Cover

Figure 19.2 - Rear Vent Adapter

6To clean the top vent adapter, open the clean-out cover.

See Figure 19.1

3" - 6"	Drill holes in back of
Offset
	stove and secure with 4
Adapter
	screws, 2 on each side.
	Clean Out
	Cover
3" - 3"
Top Vent
Adapter
Figure 19.1

Clean-Out Cover

Figure 19.3 - Rear to Top Vent Adapter - 90o

1.Put a layer of high temperature silicone on the 3 inch (76mm) exhaust outlet.

2.Slide the adapter onto the rear exhaust outlet and adjust the assembly to the appropriate position.

3.Install the vent pipe into the adapter (be sure to silicone all joints)

December 16, 2011 7014-179D Page 19