Remove these components, in order, before beginning the steps below.
The steps below do not guide you through reinstalling the components you are removing or disconnecting in this step sequence. These steps assume you are removing the PCI card divider to either replace it, or to access another component. After completing these steps, continue with the steps that directed you to this section, or follow the steps under “Installing the PCI Card Divider” on page 93 to replace your PCI card divider.
1.Pull the lever on the PCI card divider to unlatch the assembly from the system. The lever is located at the right side of the system, in front of PCI slot 1. See letter “A” in the figure below.
2.Pull the PCI card divider from the system. See letter “B” in the figure.
A
B
Figure 92. Removing the PCI Card Divider
3.Determine your next course of action and refer to the appropriate steps:
—If you are following these steps as part of another procedure, return to that procedure.
—Reinstall the PCI card divider. For instructions, see “Installing the PCI Card Divider” on page 93.
92 | Intel® Server System SR9000MK4U Product Guide |
