LSI* SAS Utility
See also “Integrated RAID User's Guide” at http://www.lsilogic.com.
Formatting a Hard Drive
Use the LSA SAS utility to format your hard drive. Use the following instructions.
Note: Because there is a time lag between screen changes, use caution in pressing the [Enter] key. Do not press the [Enter] key several times in succession. Between key presses wait for the screen to fully load before proceeding.
1.Boot to the EFI shell, and then start the SAS utility.
2.The adapter list is displayed. Select the adapter that is connected to the hard drive you need to format. Press the <Enter> key.
LSI Logic | MPT Setup Utility 2.00.06.00 |
| ||
Adapter | List |
|
|
|
Adapter | PCI | PCI | PCI FW Revision | Status |
| Bus | Dev | Fnc |
|
SAS1068 | 09 | 01 | 00 | Enabled |
Esc = | Exit Menu | F1/Shift+1 = Help |
Enter | = Adapter | Properties |
3.When adapter properties are shown, select SAS Topology and press the <Enter> key.
LSI Logic MPT Setup Utility 2.00.06.00
Adapter Properties
Adapter | SAS1068 |
PCI Address (Bus/Dev/Func) | 09:01:00 |
MPT Firmware Revision | |
SAS Address | 500605B0:00016CA0 |
Status | Enabled |
Boot Support | [Enabled BIOS & OS] |
SAS | Topology |
|
|
Advanced Adapter Properties |
| ||
Esc | = Exit Menu | F1/Shift+1 = Help | |
Enter = Select Item | = Change Item | ||
Intel® Server System SR9000MK4U Product Guide | 137 |
