Removing a Hard Drive

Cautions:

•Before performing the procedures in this chapter, except for when hot-swapping, turn off the system and disconnect all power plugs.

•If you attempt to replace a faulty hard drive using inappropriate procedures may result in data corruption.

•Before replacing any hard drives, back up all data.

•Replacing a hard drive that has not failed may corrupt data on the drive. Remove only the failed drive.

•Do not subject the hard drive to vibrations or impacts. Drive failure may result from vibrations or impact.

1.Push down on the button at the top of the drive carrier lever. See letter “A” in the figure below.

2.Pull forward on the lever to open it. See letter “B”.

3.Continue pulling on the lever to slide the carrier from the system.

B A

AF001108

Figure 28. Pulling Down on the Hard Drive Carrier Lever

40	Intel® Server System SR9000MK4U Product Guide