Miller Electric MSC-2 manual Location, Interconnecting And Power Cord Installation

SECTION 3 – INSTALLATION

3-1. Location

IMPORTANT: Mount slide so motor and cables are away from weld zone to protect from heat and spatter.

The motorized slide is normally installed onto the cross arm of a side beam opposite the side beam control. An adapter plate is available. The MSC-2 is normally installed behind the side beam control on the cross arm. Brackets are available.

3-2. Interconnecting And Power Cord Installation

		1	Motorized Slide
		2	MSC-2 Control
		3	Interconnecting Cord Plug
3	4
		4	Receptacle

Align keyways, insert plug into receptacle, and tighten threaded collar.

5 115 Volts Ac Plug

Connect plug to matching grounded and protected (time delay

1fuses or circuit breakers) 115 volts ac receptacle.

2

RIGHT-LEFT	UP-DOWN
4

3

3

5

Ref. ST-154 578 / ST-098 878-B / Ref. ST-154 602

OM-1096 Page 7