3Com MSR 50, MSR 30 manual Display ike sa, Example # Display the settings of IKE proposals, 2157

2157

Description Use the display ike proposal command to display the settings of all IKE proposals.

This command displays the configuration information of all IKE proposals in the descending order of proposal priorities.

Related command: authentication-methodon page 1721, ike proposal, encryption-algorithmon page 1725, authentication-algorithmon page 1721, dh, sa duration.

Example # Display the settings of IKE proposals.

<Sysname> display ike proposal
priority authentication authentication encryption Diffie-Hellman duration
	method	algorithm	algorithm	group	(seconds)
--------------------------------------------------------------------------
10	PRE_SHARED	SHA	DES_CBC	MODP_1024	5000
11	PRE_SHARED	MD5	DES_CBC	MODP_768	50000
default	PRE_SHARED	SHA	DES_CBC	MODP_768	86400
Table 571 Description on the fields of the display ike proposal command
Field		Description
priority		Priority of the IKE proposal
authentication method		Authentication method used by the IKE proposal
authentication algorithm		Authentication algorithm used by the IKE proposal
encryption algorithm		Encryption algorithm used by the IKE proposal
Diffie-Hellman group		DH group used in IKE negotiation in phase 1
duration (seconds)		ISAKMP SA lifetime of the IKE proposal in seconds

display ike sa

Syntax display ike sa [ verbose [ connection-id connection-idremote-address

remote-address ] ]

View Any view

Parameter verbose: Displays detailed information.

connection-id: Displays detailed information about IKE SAs by connection ID, in the range 1 to 2000000000.

remote-address: Displays detailed information about IKE SAs by remote address.

Description Use the display ike sa command to display information about the current IKE SAs.

Note that the command displays brief information about the current IKE SAs if you specify no parameters or keywords.

Related command: ike proposal, ike peer (system view).