3Com MSR 50, MSR 30 manual Display ospf vlink, Syntax display ospf process-id vlink, 1129, Ase

1129

Total Nets: 2

Intra Area: 1 Inter Area: 1 ASE: 0 NSSA: 0

Table 276 Description on the fields of the display ospf routing command

Field	Description
Destination	Destination network
Cost	Cost to destination
Type	Route type: intra-area, Transit, stub, Inter-area, Type1 External,
	Type2 External.
NextHop	Next hop address
AdvRouter	Advertising router
Area	Area ID
Total Nets	Total routes
Intra Area	Total intra-area routes
Inter Area	Total inter-area routes
ASE	Total ASE routes
NSSA	Total NSSA routes

display ospf vlink

Syntax display ospf [ process-id] vlink

View Any view

Parameters process-id: OSPF process ID, in the range 1 to 65535.

Description Use the display ospf vlink command to display OSPF virtual link information.

If no OSPF process is specified, the OSPF virtual link information of all OSPF processes is displayed.

Examples # Display OSPF virtual link information.

<Sysname> display ospf vlink

OSPF Process 1 with Router ID 3.3.3.3

	Virtual Links
Virtual-link Neighbor-ID		-> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (Serial2/0)
Cost: 1562 State: P-2-P		Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
Table 277 Description on the fields of the display ospf vlink command
Field	Description
Virtual-link Neighbor-id	ID of neighbor connected to the router via the virtual link
Neighbor-State	Neighbor State: Down, Attempt, Init, 2-Way, ExStart, Exchange,
	Loading, Full.
Interface	Local interface’s IP address and name of the virtual link