1386 CHAPTER 90: PIM CONFIGURATION COMMANDS

Related command: c-bsr group, c-bsrhash-length (PIM view), and c-bsr priority (PIM view).

Example # Configure the router to be a C-BSR for the global scope zone in the public instance, with the priority of 1.

<Sysname> system-view

[Sysname] pim

[Sysname-pim] c-bsr global priority 1

c-bsr group

Syntax c-bsr group group-address { mask mask-length } [ hash-lengthhash-length priority priority ] *

undo c-bsr group group-address

View Public instance PIM view, VPN instance PIM view

Parameter group-address: Multicast group address, in the range of 239.0.0.0 to 239.255.255.255.

mask: Mask of the multicast group address.

mask-length: Mask length of the multicast group address, in the range of 8 to 32.

hash-length: Hash mask length for RP selection calculation in the BSR admin-scope region corresponding to the specified multicast group, in the range of 0 to 32. If you do not include this keyword in your command, the corresponding global setting will be used.

priority: Priority of the C-BSR in the BSR admin-scope region corresponding to a multicast group, in the range of 0 to 255. If you do not include this keyword in your command, the corresponding global setting will be used. A larger value of this argument means a higher priority.

Description Use the c-bsr group command to configure a C-BSR for the BSR admin-scope region associated with the specified group.

Use the undo c-bsr group command to remove the C-BSR configuration for the

BSR admin-scope region associated with the specified group.

By default, no C-BSRs are configured for BSR admin-scope regions.

Related command: c-bsr global, c-bsradmin-scope,c-bsrhash-length (PIM view), and c-bsr priority (PIM view).

Example # In the public instance configure the router to be a C-BSR in the BSR admin-scope region associated with the multicast group address 239.0.0.0/8, with the priority of 10.

Page 1386
Image 1386
3Com MSR 30, MSR 50 manual Bsr group, Undo c-bsr group group-address