3Com MSR 30, MSR 50 Example # Display the status information of VAM client abc, Field Description

1732 CHAPTER 100: VAM CLIENT CONFIGURATION COMMANDS

Parameter address-map: Refers to the mapping information between public and private network addresses of the VAM client.

fsm: Refers to the status information of the VAM client.

client-name: VAM client name, a case-insensitive string of 1 to 31 characters.

Description Use the display vam client command to display registration information of the VAM client.

On a Spoke, the command displays the address mapping information of the other Spokes and the Hubs that is received from the VAM server. On a Hub, the command displays the address mapping information of the other Hubs that is received from the VAM server.

Note that:

■If client-nameis specified, the registration information of a specific VAM client is displayed.

■If client-nameis not specified, the registration information of all VAM clients is displayed.

■As for the arguments not specified, or the information not obtained dynamically, the corresponding information will not be displayed.

Example # Display the status information of VAM client abc.

<Sysname> display vam client fsm abc Client name: hub

VPN name: 1

Interface: Tunnel0

Resend interval(seconds): 5

Client type: Hub

Username: user1

Primary server: 28.1.1.23

Current state: ONLINE

Holding time: 9h 20m 30s

Encryption-algorithm: AES-128

Authentication-algorithm: SHA1

Secondary server: 28.1.1.33

Current state: OFFLINE

Holding time: 1h 24m 1s

Encryption-algorithm: AES-128

Authentication-algorithm: SHA1

Table 464 Description on the fields of the display vam client fsm command

Field	Description
Client name	Name of the VAM client
VPN name	Name of the VPN domain where the VAM client resides
Interface	DVPN tunnel interface of the VAM client
Resend interval(seconds)	Protocol message retransmission interval of the VAM client
Client type	VAM client type, Hub or Spoke
Username	Username of the VAM client