3Com MSR 30, MSR 50 manual Display ospf peer

1124 CHAPTER 76: OSPF CONFIGURATION COMMANDS

display ospf peer

Syntax display ospf [ process-id ] peer [ verbose [ interface-type interface-number ] [ neighbor-id ] ]

View Any view

Parameters process-id: OSPF process ID, in the range 1 to 65535. verbose: Displays detailed neighbor information. interface-typeinterface-number: Interface type and number neighbor-id: Neighbor router ID.

Description Use the display ospf peer command to display information about OSPF neighbors.

Note that:

If no OSPF process is specified, OSPF neighbor information of all OSPF processes is displayed.

If an interface is specified, the neighbor on the interface is displayed.

If a neighbor ID is specified, detailed information about the neighbor is displayed,

If neither interface nor neighbor ID is specified, brief information about neighbors of the specified OSPF process or all OSPF process is displayed.

Examples # Display detailed OSPF neighbor information.

<Sysname> display ospf peer verbose

OSPF Process 1 with Router ID 1.1.1.1

Neighbors

Area 0.0.0.0 interface 1.1.1.1(Ethernet0/1/0)’s neighbors

Router ID: 1.1.1.2		Address: 1.1.1.2	GR State: Normal
State: Full	Mode: Nbr is Master Priority: 1
DR: 1.1.1.2	BDR: 1.1.1.1	MTU: 0
Dead timer due in 33 sec
Neighbor is up for 02:03:35
Authentication Sequence: [ 0 ]
Neighbor state change count: 6
Table 271 Description on the fields of the display ospf peer verbose command
Field	Description
Area	Area of the neighbor
Interface	Interface connected to neighbor
Router ID	Neighbor router ID
Address	Neighbor router address
GR State	GR state