3Com MSR 50, MSR 30 manual Rmon event

2323

# Remove the alarm table entry with the index of 15.

<Sysname> system-view

[Sysname] undo rmon alarm 15

rmon event

Syntax	rmon event entry-number [ description string ] { log log-traplog-trapcommunity
	none trap trap-community } [ owner text ]
	undo rmon event entry-number
View	System view
Parameter	entry-number: Event entry index, in the range 1 to 65,535.
	description string: Event description, a string of 1 to 127 characters.
	log: Logs the event when it occurs.
	log-traplog-trapcommunity: Log and trap events. The system records the log
	information and sends a trap when the event occurs. log-trapcommunityindicates
	the community name of the network management station that receives trap
	messages, a string of 1 to 127 characters.
	none: Performs no action when the event occurs.
	trap trap-community: Trap event. The system sends a trap with the community
	name being trap-communitywhen the event occurs. trap-communityrepresents
	the community name of the network management station that receives trap
	message, a string of 1 to 127 characters.
	owner text: Owner of the entry, a string of 1 to 127 characters. It is case sensitive
	and space is supported.
Description	Use the rmon event command to create an entry in the RMON event table.
	Use the undo rmon event command to remove a specified entry from the
	RMON event table.
	When an event is triggered by its associated alarm in the alarm table, the event
	group allows you to log it, send a trap, do both, or do neither at all. This helps
	control the generation and notification of events.
n	■ When you create an entry, if the values of the specified event description
	(description string), event type (log, trap, logtrap or none), and community
	name (trap-community or log-trapcommunity) are identical to those of the
	existing event entry, the system considers their configurations the same and the
	creation fails.
	■ You can create up to 60 alarm entries.