3Com MSR 50, MSR 30 Dot1x quiet-period, Syntax dot1x quiet-period Undo dot1x quiet-period, 1907

1907

Parameter macbased: Specifies to use the macbased authentication method. With this method, each user of a port must be authenticated separately, and when an authenticated user goes offline, no other users are affected.

portbased: Specifies to use the portbased authentication method. With this method, after the first user of a port passes authentication, all other users of the port can access the network without authentication, and when the first user goes offline, all other users get offline at the same time.

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The interface-listargument is in the format of interface-list=

{interface-type interface-number [ to interface-type interface-number ] } & <1-10>, where interface-type represents the port type, interface-number represents the port number, and & <1-10> means that you can provide up to 10 port indexes/port index lists for this argument. The start port number must be smaller than the end number and the two ports must of the same type.

Description Use the dot1x port-methodcommand to set the access control method for specified or all ports.

Use the undo dot1x port-methodcommand to restore the default.

The default access control method is macbased.

Related command: display dot1x.

Example # Set the access control method to portbased for port Ethernet 1/1.

<Sysname> system-view

[Sysname] dot1x port-method portbased interface ethernet 1/1 Or

<Sysname> system-view

[Sysname] interface ethernet 1/1 [Sysname-Ethernet1/1] dot1x port-method portbased

dot1x quiet-period

Syntax dot1x quiet-period

undo dot1x quiet-period

View System view

Parameter None

Description Use the dot1x quiet-periodcommand to enable the quiet timer function. Use the undo dot1x quiet-periodcommand to disable the function.

By default, the function is disabled.