3Com MSR 50, MSR 30 Firewall packet-filter ipv6, Reset firewall ethernet-frame-filter, Outbound

1997

firewall packet-filter ipv6

Syntax	firewall packet-filter ipv6 { acl6-numbername acl6-name} { inbound
	outbound }
	undo firewall packet-filter ipv6 { inbound outbound }
View	Interface view
Parameter	acl-number: Basic ACL number, in the range 2000 to 2999; advanced ACL
	number, in the range 3000 to 3999.
	name acl6-name: Specifies the name of a basic or advanced IPv6 ACL, a
	case-insensitive string of 1 to 32 characters that must start with an English letter a
	to z or A to Z. To avoid confusion, the word “all” cannot be used as the ACL
	name.
	inbound: Filters packets in the inbound direction.
	outbound: Filters packets in the outbound direction.
Description	Use the firewall packet-filter ipv6 command to configure IPv6 packet filtering
	on the interface.
	Use the undo firewall packet-filter ipv6 command to remove the IPv6 packet
	filtering setting on the interface.
	By default, IPv6 packets are not filtered on the interface.
Example	# Configure IPv6 packet filtering for Ethernet 1/0 using IPv6 ACL 2500.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] firewall packet-filter ipv6 2500 outbound

reset firewall ethernet-frame-filter

Syntax	reset firewall ethernet-frame-filter { all dlsw interface interface-type interface
	number }
View	User view
Parameter	all: Removes all firewall statistics.
	dlsw: Removes the firewall statistics of the DLSw module.
	interface-typeinterface-number: Specifies an interface by its type and number.
Description	Use the reset firewall ethernet-frame-filtercommand to clear the Ethernet
	frame filtering statistics.