641

Example # Configure the default VLAN ID for the Hybrid port Ethernet 1/0 to be 100.

<Sysname> system-view [Sysname] vlan 100 [Sysname-vlan100] quit [Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] port link-type hybrid

[Sysname-Ethernet1/0] port hybrid pvid vlan 100

port hybrid vlan

Syntax port hybrid vlan vlan-id-list{ tagged untagged }

undo port hybrid vlan vlan-id-list

View Ethernet interface view, port group view

Parameter vlan-id-list: The range of VLANs that the Hybrid ports will be added to, vlan-id-list

=[ vlan-id1[ to vlan-id2] ]&<1-10>, where vlan-idranges from 1 to 4,094 and &<1-10> indicates that you can specify up to 10 times.

tagged: Specifies to tag the packets of the specified VLAN (s).

untagged: Specifies not to tag the specified VLAN(s).

Description Use the port hybrid vlan command to add the current Hybrid port to the specified VLAN(s).

Use the undo port hybrid vlan command to remove the current Hybrid port from the specified VLAN(s).

A hybrid port can belong to multiple VLANs and thus can allow packets of multiple VLANs to pass. Repetitive execution of the port hybrid vlan vlan-id-list{ tagged untagged } command will yield a set VLANs, to which the Hybrid port belongs.

Configured in Ethernet interface view, the setting is effective on the current port only; configured in port group view, the setting is effective on all ports in the port group.

Refer to “Link Aggregation Configuration Commands” on page 473 for information about port groups.

Related command: port link-type.

Example # Add the Hybrid port Ethernet 1/0 to VLAN 2, VLAN 4, and the range of VLANs from VLAN 50 to VLAN 100. Tag all packets of these VLANs.

<Sysname> system-view [Sysname] vlan all Please wait... Done.

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] port link-type hybrid

[Sysname-Ethernet1/0] port hybrid vlan 2 4 50 to 100 tagged

Page 641
Image 641
3Com MSR 50, MSR 30 manual Port hybrid vlan, 641