3Com MSR 50, MSR 30 manual MLD Configuration Commands, Display mld group

92

MLD CONFIGURATION COMMANDS

display mld group

Syntax display mld group [ ipv6-group-address interface interface-type interface-number ] [ static verbose ]

View Any view

Parameter ipv6-group-address: MLD multicast group address, in the range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to F.

interface interface-type interface-number: Displays the information of MLD multicast groups on the specified interface.

static: Displays the information of statically joined MLD multicast groups.

verbose: Displays detailed information of MLD multicast groups.

Description Use the display mld group command to view information of MLD multicast groups.

Note that:

■If you do not specify an IPv6 multicast group address, this command will display the MLD information of all the multicast groups.

■If you do not specify interface-typeinterface-number, this command will display the MLD multicast group information on all the interfaces.

■If you do not specify the static keyword, the information of only dynamically joined MLD groups will be displayed.

Example # View the detailed information of dynamically joined MLD multicast groups on all interfaces.

<Sysname> display mld group verbose Interface group report information Ethernet1/0(FE80::101)

Total 1 MLD Groups reported

Group: FF03::101

Uptime: 00:01:46

Expires: 00:01:30

Last reporter: FE80::10

Last-listener-query-counter: 0