3Com MSR 30 Interface atm, Reset atm interface, Syntax reset atm interface atm interface-number

112CHAPTER 1: PUBLIC ATM AND DSL INTERFACE COMMANDS

interface atm

Syntax interface atm interface-number

View System view

Parameter interface-number: ATM or DSL interface number or DSL interface view.

Description Use the interface atm command to enter ATM interface view.

Example # Enter ATM 2/0 interface view.

<Sysname> system-view

[Sysname] interface atm 2/0

[Sysname-Atm2/0]

reset atm interface

Syntax reset atm interface [ atm interface-number]

View User view

Parameter atm interface-number: Specifies an ATM interface.

Description Use the reset atm interface command to clear the statistics on the PVCs created on an ATM interface or all the ATM interfaces.

Note that:

■If you execute this command with an ATM interface specified, this command displays the statistics on the PVCs created on the ATM interface.

■If you execute this command with no ATM interface specified, the statistics on the PVCs created on all the ATM interfaces are cleared.

To clear statistics about ATM interfaces, use the reset counters interface command, which is described in Ethernet Interface Commands in the Access Volume.

Example # Clear the statistics on all the PVCs created on ATM 2/0 interface.

<Sysname> reset atm interface atm 2/0