3Com MSR 50, MSR 30 Reset voice radius statistic, Selectlanguage, Display voice radius statistic

2741

reset voice radius statistic

Syntax	reset voice radius statistic
View	User view
Parameter	None
Description	Use the reset voice radius statistic command to clear statistics of messages
	exchanged between the voice RADIUS module, CMC module, and AAA module.
Related command:	display voice radius statistic.
Example	# Clear the statistics of messages exchanged between the voice RADIUS module,
	CMC module, and AAA module.
	<Sysname> reset voice radius statistic

selectlanguage

Syntax	selectlanguage { enable chinese english }
	undo selectlanguage
View	Access number view
Parameter	enable: Enables the language selection function so that users can select a
	language to play prompt tones.
	chinese: Plays prompt tones in Chinese.
	english: Plays prompt tones in English.
Description	Use the selectlanguage command to configure a language in which prompt
	tones are played in the caller number process with IVR.
	Use the undo selectlanguage command to restore the default.
	By default, prompt tones are played in Chinese.
	This command is available only in the caller number process with IVR.
Related command:	gw-access-numberand process-config.
Example	# Configure the voice gateway to play prompt tones in English.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] dial-program