3Com MSR 30, MSR 50 manual Nqa agent enable, Syntax nqa agent enable Undo nqa agent enable

2274 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

nqa

Syntax nqa entry admin-name operation-tag

undo nqa { all entry admin-name operation-tag }

View System view

Parameter admin-name: Specifies the name of the administrator who creates the NQA test operation, a string of 1 to 32 characters, with “-” excluded. It is case-insensitive.

operation-tag: Specifies the tag of a test operation, a string of 1 to 32 characters, with “-” excluded. It is case-insensitive.

all: All NQA test groups.

Description Use the nqa command to create an NQA test group and enter NQA test group view.

Use the undo nqa command to remove the test group.

Note that if the test type has been configured for the test group, you will directly enter NQA test type view when you execute the nqa command.

Example # Create an NQA test group whose administrator name is admin and whose operation tag is test and enter NQA test group view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test]

nqa agent enable

Syntax nqa agent enable

undo nqa agent enable

View System view

Parameter None

Description Use the nqa agent enable command to enable the NQA client.

Use the undo nqa agent enable command to disable the NQA client and stop all the tests being performed.

By default, the NQA client is enabled.

Related command: nqa server enable.