3Com MSR 50, MSR 30 manual Tunnel-protocol dvpn udp, Related command Interface tunnel on Example

	1747
Related command:	interface tunnel on page 884.
Example	# Set the DVPN keepalive interval to 20 seconds and the maximum number of
	attempts for transmitting a keepalive packet to 5.
	<Sysname> system-view
	[Sysname] interface Tunnel 0
	[Sysname-Tunnel0] keepalive 20 5
reset dvpn session
Syntax	reset dvpn session { all interface interface-typeinterface-number[ private-ip
	ip-address ] }
View	User view
Parameter	all: Specifies all Spoke-Spoke and Spoke-Hub tunnels connected with the VAM
	client.
	interface interface-typeinterface-number: Specifies the DVPN tunnels on the
	interface. The interface-typeargument can only be tunnel.
	private-ipip-address: Specifies the private IP address of the peer client.
Description	Use the reset dvpn session command to remove DVPN tunnels connected with
	the current client.
Example	# Remove the Spoke-Spoke tunnel on interface Tunnel0 whose peer private
	address is 169.254.0.1.
	<Sysname> reset dvpn session interface tunnel 0 private-ip 169.254.0.1

tunnel-protocol dvpn udp

Syntax tunnel-protocol dvpn udp

undo tunnel-protocol

View Tunnel interface view

Parameter None

Description Use the tunnel-protocol dvpn udp command to configure the DVPN tunnel mode.

Use the undo tunnel-protocolcommand to restore the default.

The default mode is GRE.