3Com MSR 50, MSR 30 manual Related command dialer threshold on, Ppp mp min-fragment size

519

min-bindcommand is configured, the dialer timer idle command no longer takes effect.

The argument min-bind-nummust be no greater than max-bind-num.

Related command: dialer threshold on page 324

Example # Set the minimum number of links contained in an MP bundle to 4.

<Sysname> system-view [Sysname] interface dialer 0 [Sysname-dialer0] ppp mp min-bind 4

ppp mp min-fragment

Syntax	ppp mp min-fragment size
	undo ppp mp min-fragment
View	Virtual template interface view, dialer interface view, MP-group interface view
Parameter	size: Specifies the minimum MP outgoing packet size to be fragmented, in bytes.
	The value ranges from 128 to 1500. If the MP outgoing packet is smaller than this
	value, it will not be fragmented. If the MP packet is larger than or equal to this
	value, it will be fragmented.
Description	Use the ppp mp min-fragmentcommand to set the minimum size of MP
	outgoing packet to be fragmented.
	Use the undo ppp mp min-fragmentcommand to restore the default, that is,
	128 bytes.
	If you do not want small packets to be fragmented, you can specify the size
	argument to an appropriate value.
n	■ If MP bundle is implemented through hardware (CPOS chip for example), the
	minimum fragment size varies with chips (for example, the fragment size on
	certain chips can only be 128, 256, and 512 bytes). In this case, you need to
	make sure the setting specified by the ppp mp min-fragmentcommand
	conforms to the hardware specification for the MP bundle and the sub-channel
	LCP link to be established successfully.
	■ After executing the ppp mp min-fragmentcommand, you need to shut
	down and then bring up all the bundled ports for the new setting to take
	effect.
Example	# Set the minimum MP packet size for fragmentation to 500 bytes.
	<Sysname> system-view
	[Sysname] interface virtual-template 0
	[Sysname-Virtual-Template0] ppp mp min-fragment 500