3Com MSR 30, MSR 50 manual Tunnel flow-control, Tunnel name

1766 CHAPTER 104: L2TP CONFIGURATION COMMANDS

	<Sysname> system-view
	[Sysname] l2tp-group 1
	[Sysname-l2tp1] tunnel avp-hidden
tunnel flow-control
Syntax	tunnel flow-control
	undo tunnel flow-control
View	L2TP group view
Parameter	None
Description	Use the tunnel flow-controlcommand to enable the L2TP tunnel flow control
	function.
	Use the undo tunnel flow-controlcommand to disable the L2TP tunnel flow
	control function.
	By default, the L2TP tunnel flow control function is disabled.
Example	# Enable the L2TP tunnel flow control function.
	<Sysname> system-view
	[Sysname] l2tp-group 1
	[Sysname-l2tp1] tunnel flow-control
tunnel name
Syntax	tunnel name name
	undo tunnel name
View	L2TP group view
Parameter	name: Name for the tunnel at the local end, a string of 1 to 30 characters.
Description	Use the tunnel name command to specify the name of a tunnel at the local end.
	Use the undo tunnel name command to restore the default.
	By default, a tunnel takes the system name of the device as its name at the local
	end.
Related command:	sysname on page 2423.

Example # Specify the local name for a tunnel as itsme.