3Com MSR 30 manual Display diagnostic-information, # Display the configuration beginning with user

2414 CHAPTER 162: BASIC CONFIGURATION COMMANDS

controller E1	6/0
#
controller E1	6/1

pri-set

#

controller E1 6/2

pri-set

#

controller E1 6/3

using e1

	#
	return
	# Display the configuration beginning with “user”.
	<Sysname> display current-configuration begin user
	user-interface aux 0
	user-interface vty 0 4
display diagnostic-information
Syntax	display diagnostic-information
View	Any view
Parameter	None
Description	Use the display diagnostic-informationcommand to display or save the
	statistics of each module’s running status in the system.
	When the system is out of order, you need to collect a lot of information to locate
	the problem. At this time you can use the display diagnostic-information
	command to collect prompt information of the commands display clock, display
	version, display device, display current-configuration.
Example	# Save the statistics of each module’s running status in the system.
	<Sysname> display diagnostic-information

Save or display diagnostic information (Y=save, N=display)?[Y/N]y

Please input the file name(*.diag)[flash:/default.diag]:aa.diag

Diagnostic information is outputting to flash:/aa.diag.

Please wait...

Save succeeded.

You can view the content of the file aa.diag by executing the more.aa.diag command in user view, in combination of the <Page Up> and <Page Down> keys.

# Display the statistics of each module’s running status in the system.

<Sysname> display diagnostic-information

Save or display diagnostic information (Y=save, N=display)?[Y/N]n