3Com MSR 30, MSR 50 manual Rta rtc-server listen-port

914CHAPTER 70: TERMINAL ACCESS CONFIGURATION COMMANDS

Parameters	mac-address interface interface-type interface-number: Uses the specified
	interface MAC address as the character string for router authentication.
	interface-typeinterface-number: Specifies a port by port type and port number.
	string string: Uses a user-defined string for router authentication. string is a
	user-defined string of 1 to 30 characters.
Description	Use the rta bind command to configure a character string for router
	authentication.
	Use the undo rta bind command to restore the default.
	By default, no authentication string is configured on the router.
	This configuration is used to authenticate the connection between the router and
	the FEP. If the authentication succeeds (that is, the MAC address sent by the router
	and that configured on the FEP are consistent), the connection is established;
	otherwise, no connection can be established between the router and the FEP.
n	■ Only a MAC address or a character string can be configured at a time, and the
	latest configured one takes effect.
	■ The authentication type and character string configured on the router and FEP
	must be the same. Otherwise, the authentication fails and no connection can
	be established.
Example	# Bind the MAC address of Ethernet 0/0 for router authentication.
	<Sysname> system-view
	[Sysname] rta bind mac-address interface ethernet 0/0
	# Bind the character string abc for router authentication.
	<Sysname> system-view
	[Sysname] rta bind string abc

rta rtc-server listen-port

Syntax rta rtc-server listen-port port-number

undo rta rtc-server listen-port port-number

View System view

Parameters port-number: Listening TCP port number of the RTC server, ranging 1024 to 50000.

Description Use the rta rtc-serverlisten-portcommand to configure the listening port on the RTC server.

Use the undo rta rtc-serverlisten-portcommand to cancel the configured listening port.