3Com MSR 30, MSR 50 manual Security-policy-server, Server-type, View Radius scheme view

1968 CHAPTER 128: RADIUS CONFIGURATION COMMANDS

Related command: key (RADIUS scheme view), radius scheme, state.

Example # Set the IP address of the secondary authentication/authorization server for RADIUS scheme radius1 to 10.110.1.2 and the UDP port of the server to 1812.

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812

security-policy-server

Syntax security-policy-server ip-address

undo security-policy-server { ip-addressall }

View RADIUS scheme view

Parameter ip-address: IP address of a security policy server. all: All IP addresses

Description Use the security-policy-servercommand to configure the IP address of a security policy server.

Use the undo security-policy-servercommand to remove one or all configured

IP addresses.

By default, no IP address is configured for a security policy server.

Related command: radius nas-ip

Example # For RADIUS scheme radius1, set the IP address of a security policy server to 10.110.1.2

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] security-policy-server 10.110.1.2

server-type

Syntax server-type { extended standard }

undo server-type

View RADIUS scheme view

Parameter extended: Specifies the extended RADIUS server (generally CAMS), which requires the RADIUS client and RADIUS server to interact according to the procedures and packet formats provisioned by the private RADIUS protocol.