3Com MSR 30, MSR 50 manual Display ipv6 pathmtu, Display ipv6 socket, Socket, and 3 a raw IP socket

836CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS

<Sysname> display ipv6 neighbors dynamic count

Total dynamic entry(ies): 2

display ipv6 pathmtu

Syntax display ipv6 pathmtu { ipv6-addressall dynamic static }

View Any view

Parameter ipv6-address: IPv6 address whose PMTU information is to be displayed. all: Displays all PMTU information.

dynamic: Displays all dynamic PMTU information.

dynamic: Displays all static PMTU information.

Description Use the display ipv6 pathmtu command to display the PMTU information of IPv6 addresses.

Example # Display all PMTU information.
	<Sysname> display ipv6 pathmtu all
	IPv6 Destination Address	ZoneID	PathMTU	Age	Type
	fe80::12	0	1300	40	Dynamic
2222::3		0	1280	-	Static
	Table 177 Description on fields of the display ipv6 pathmtu command
	Field	Description
	IPv6 Destination Address	Destination IPv6 address
	ZoneID	ID of address zone, currently invalid
	PathMTU	PMTU of an IPv6 address
	Age	Time for a PMTU to live. For a static PMTU, a hyphen “-” is
		displayed.
	Type	Indicates the PMTU is dynamically negotiated or statically
		configured.

display ipv6 socket

Syntax	display ipv6 socket [ socktype socket-type ] [ task-id socket-id ]
View	Any view
Parameter	socktype socket-type: Displays the socket information of this type. The socket
	type is in the range of 1 to 3. The value “1” represents a TCP socket, “2” a UDP
	socket, and “3” a raw IP socket.
	task-id: Displays the socket information of the task. The task ID is in the range 1 to
	100.