3Com MSR 50, MSR 30 Shell, Related command authentication-mode, Syntax shell, Undo shell, 2471

2471

1234567 for example. A cipher text password, or the encrypted version of the plain text password, comprises 24 characters, such as _(TT8F]Y5SQ=^Q‘MAF4<1!!.

Description Use the set authentication password command to set a local authentication password.

Use the undo set authentication password command to remove the local authentication password.

No local authentication password is set by default.

■When setting a password, you should specify simple to save it in plain text in the configuration file, or specify cipher to save it in cipher text.

■Whether the password format is plain text or cipher text, you must type in plain text password at authentication.

■Plain text password easily gets cracked. Therefore, you are recommended to use cipher text password.

Related command: authentication-mode.

Example # Set the local authentication password for the user interface Console 0 to hello.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0] authentication-mode password

[Sysname-ui-console0] set authentication password cipher hello

After setting the password, you will be required to input the password next time you enter the system.

shell

Syntax shell

undo shell

View User interface view

Parameter None

Description Use the shell command to enable terminal services on the user interface.

Use the undo shell command to disable this function.

By default, terminal services are enabled on all user interfaces.

There are a few restrictions on using the undo shell command:

■This command is not supported on the Console port.