Commands, Command Description | Gefen GTV-HDMI1.3-441N instruction

RS-232 SERIAL CONTROL

Commands

These commands are not case-sensitive.

Command Description

A

N

S

V

Enable Auto-Switching

Disable Auto-Switching

Get System Status

Displays Firmware Version

Command Descriptions:

A Command

The A command enables auto-switching. The Switcher will automatically switch to the last source device that was powered on.

Syntax:

a

Parameters:

None

N Command

The N command disables Auto-Switching.

Syntax:

n

Parameters:

None

13

Image 16

Gefen GTV-HDMI1.3-441N user manual Commands, Command Descriptions

Contents

4X1 Gefen TV Switcher Asking for Assistance Technical SupportTechnical Support Hours Write To Contents GefenTV Switcher IntroductionGefenTV How It Works Operation Notes Features Hdmi 1.3 FeaturesFeatures Package Includes Panel Layout Power Indicator Panel Descriptions IR Remote Description RMT-4IR Remote Installing the IR Remote Control Battery IR Remote InstallationBattery Slot DIP Switches IR Remote ConfigurationResolving IR Code Conﬂicts Setting The IR Channel Changing the IR Channel How to Connect the 4x1 GefenTV Switcher Wiring Diagram for the GefenTV 4x1 Switcher for Hdmi How to control the GefenTV 4x1 Switcher for Hdmi Automatic Switching RS-232 Serial Control 3 2 3 4 Commands Command DescriptionCommand Descriptions Command Syntax Parameters None Examples Specifications DB9 female Warranty Product Registration Rev A3 Nordhoff St., Chatsworth CA