3Com MSR 50, MSR 30 manual Line, Match-template, Undo line, 2599

2599

line

Syntax line line-number

undo line

View POTS entity view

Parameter line-number:Number of a subscriber line.

Description Use the line command to associate the voice entity with a specified voice subscriber line.

Use the undo line command to remove this association.

By default, there is no association between a voice entity and a voice subscriber line.

Example # Associate voice entity 10 and voice subscriber line 1/0.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots [Sysname-voice-dial-entity10] line 1/0

match-template

Syntax match-template match-string

undo match-template

View POTS/VoIP/VoFR entity view

Parameter match-string: Number template. Its format is [ + ] { string [ T ] [ $ ] T }, with the maximum length of 31 characters. The characters are described in the following.

■+: Appears at the beginning of a calling number to indicate that the number is E.164-compliant.

■$: Is the last character, indicating the end of the number. That means the entire called number must match the string part before “$”.

■T: Timer. It means the system is waiting the subscriber for dialing any number

till: the number length threshold is exceeded, or the subscriber inputs the terminator; or the timer expires. T is used to match a number with any digits.

■string: A string composed of any characters of “0123456789#*.!+%[]()-”. The meanings of the characters are described in the following table: