3Com MSR 30, MSR 50 manual Display snmp-agent group, Syntax display snmp-agent group group-name

2330 CHAPTER 154: SNMP CONFIGURATION COMMANDS

Community name: bb

Group name: bb

Storage-type: nonVolatile

Table 614 Descriptions on the fields of display snmp-agent community

Field	Description
Community name	Community name
Group name	SNMP group name
Acl	The number of the ACL in use
Storage-type	Storage type, which could be:
	■ volatile: Information will be lost if the system is rebooted
	■ nonVolatile: Information will not be lost if the system is rebooted
	■ permanent: Modification permitted, but deletion forbidden
	■ readOnly: Read only, that is, no modification, no deletion
	■ other: Other storage types

display snmp-agent group

Syntax display snmp-agent group [ group-name]

View Any view

Parameter group-name: Specifies the SNMP group name, a string of 1 to 32 characters, case sensitive.

Description Use the display snmp-agent group command to display information for the SNMP agent group, including group name, security model, MIB view, storage type, and so on. Absence of the group-nameparameter indicates that information for all groups will be displayed.

Example # Display the information of all SNMP agent groups.

<Sysname> display snmp-agent group Group name: aa

Security model: v3 noAuthnoPriv

Readview: ViewDefault

Writeview: <no specified>

Notifyview:<no specified>

Storage-type: nonVolatile

Table 615 Descriptions on the fields of the display snmp-agent group command

Field	Description
Group name	SNMP group name
Security model	Security model of the SNMP group, which can be: authPriv (authentication
	with privacy), authNoPriv (authentication without privacy), or
	noAuthNoPriv (no authentication no privacy).
Readview	The read only MIB view associated with the SNMP group
Writeview	The writable MIB view associated with the SNMP group