3Com MSR 50 Display connection-limit policy, Example # Create a connection-limit policy numbered

2017

Description Use the connection-limit policy command to create or edit a connection-limit policy and enter connection-limit policy view.

Use the undo connection-limit policy command to delete a specified or all connection-limit policies.

Note that:

■A connection-limit policy contains a set of rules that define the connection-limit mode, the maximum connection rate and the connection number. By default, the connection-limit mode and the maximum connection rate are subject to the global configuration.

■When creating a connection-limit policy, you need to assign it a number that uniquely identifies that policy. Polices are matched by number in descending order.

■You can modify the rules in a policy only before binding the policy to a NAT module. No matter a connection-limit policy is bound to a NAT module or not, however, you can modify the connection-limit mode and the maximum connection rate. Additionally, you can add or delete rules to/from the policy.

Example # Create a connection-limit policy numbered 1.

<Sysname> system-view

[Sysname] connection-limit policy 1

display connection-limit policy

Syntax display connection-limit policy { policy-numberall }

View Any view

Parameter policy-number: Number of a connection-limit policy, in the range 0 to 19. all: Displays all connection-limit policies.

Description Use the display connection-limit policy command to display the information of a specified or all connection-limit policies.

Example # Display all connection-limit policies configured.

<Sysname> display connection-limit policy all There is 1 policy:

Connection-limit policy 1, refcount 0 , 1 limit limit mode amount

limit rate 11

limit 1 acl 2001 per-source amount 1111 10

Table 521 Description on the fields of the display connection-limit policy all command

Field	Description
Connection-limit policy	Number of the connection-limit policy
refcount	Number of times that a policy is referenced