3Com MSR 50, MSR 30 manual Reset lacp statistics, Port-group aggregation agg-id

	481
Description	Use the port link-aggregation group command to add the Ethernet port to a
	link aggregation group (manual or static LACP).
	Use the undo port link-aggregation group command to remove the Ethernet
	port from a link aggregation group.
Related command:	display link-aggregation verbose.
Example	# Assign port Ethernet 1/0 to link aggregation group 22.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] port link-aggregation group 22
port-group aggregation
Syntax	port-group aggregation agg-id
View	System view
Parameter	agg-id: Aggregation port group ID, in the range 1 to 144.
Description	Use the port-group aggregation command to enter aggregation port group
	view.
	Instead of being created administratively, an aggregation port group is created
	automatically upon creation of a link aggregation group and assigned the ID of
	the link aggregation group. In aggregation port group view, you can configure
	aggregation related settings such as STP, VLAN, QoS, GVRP, and MAC address
	learning, but cannot add or remove member ports.
Example	# Enter aggregation port group view.
	<Sysname> system-view
	[Sysname] port-group aggregation 10
	[Sysname-port-group-aggregation-10]
reset lacp statistics
Syntax	reset lacp statistics [ interface interface-type interface-number [ to interface-type
	interface-number ] ]
View	User view
Parameter	interface interface-type interface-number [ to interface-type interface-number ]:
	Specifies an interface range or an interface if the to keyword and the second
	interface are not specified.