3Com MSR 50, MSR 30 Display tunnel-policy, # Display information about Ospf sham links in area

1691

Table 459 Description on the fields of the display ospf sham-link command

Field	Description
RouterId	Router ID of the sham link
Source-IP	Source IP address of the sham link
Destination-IP	Destination IP address of the sham link
State	Status of the sham link interface
Cost	Cost of the sham link

# Display information about OSPF sham links in area 1.

<Sysname> display ospf sham-link area 1

OSPF Process 100 with Router ID 100.1.1.2

Sham-Link: 3.3.3.3 --> 5.5.5.5

Neighbour State: Full

Area: 0.0.0.1

Cost: 10 State: P-2-P, Type: Sham

Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1

Table 460 Description on the fields of the display ospf sham-link area command

Field	Description
Sham-Link	Sham link expressed in the format of source IP address to destination
	IP address
Neighbor State	Status of the sham link neighbor
Area	Destination IP address of the sham link
Cost	Cost of the sham link
State	Status of the sham link
Type	Type of the sham link
Timers	Timers of the sham link

display tunnel-policy

Syntax	display tunnel-policy { all policy-name tunnel-policy-name}
View	Any view
Parameter	all: Specifies all tunneling policies.
	tunnel-policy-name: Name of a tunneling policy, a string of 1 to 19 characters.
Description	Use the display tunnel-policycommand to display information about a
	tunneling policy or all tunneling policies.

Related command: tunnel-policy,tunnel select-seqload-balance-number.

Example # Display all tunneling policies.

<Sysname>display tunnel-policy all
Tunnel Policy Name	Select-Seq	Load balance No

------------------------------------------------------