3Com MSR 30 Fr del inbound-interface, Related commands fr del inbound-interface,fr del protocol

1888 CHAPTER 125: FR QOS CONFIGURATION COMMANDS

In the view of a FR main interface (or subinterface), this command can only apply a

DE rule list to the FR VCs on the main interface or (or subinterface).

After a DE rule list is applied to FR virtual circuit, those packets that match the rule list will have their DE flag set to 1.

Related commands: fr del inbound-interface,fr del protocol.

Examples # In the view of interface Serial 1/0, apply DE rule list 3 to DLCI 100 on the current interface.

<Sysname> system-view

[Sysname]interface Serial 1/0

[Sysname-Serial1/0] fr dlci 100

[Sysname-Serial1/0] fr de del 3 dlci 100

fr del inbound-interface

Syntax fr del list-number inbound-interfaceinterface-type interface-number

undo fr del list-number inbound-interfaceinterface-type interface-number

View System view

Parameters list-number: Number of DE rule list, ranging from 1 to 10.

interface-typeinterface-number: Specifies an interface by its type and number.

Description Use the fr del inbound-interfacecommand to configure an interface-based DE rule list. For the packet received from the specified interface, if it is forwarded from the router as a FR packet, its DE flag bit is set to 1 before being forwarded.

Use the undo fr del inbound-interfacecommand to delete the specified DE rule from a DE rule list.

By default, no DE rule list is created.

New rules can be added to a DE rule list by using this command repeatedly. Up to 100 rules can be configured in a DE rule list. The undo form of this command can once delete one DE rule only. To delete a DE rule list, you should first delete all DE rules in it.

Related commands: fr de del, fr del protocol.

Examples # Add a rule to DE rule list 1. For the packet received from the interface Serial 1/0, if it is needed to be forwarded by encapsulating FR protocol, flag the DE flag bit of the packet as 1 before forwarding.

<Sysname> system-view

[Sysname] fr del 1 inbound-interface Serial 1/0