3Com MSR 50, MSR 30 manual Dhcp Debugging Commands, Debugging dhcp server

56

DHCP DEBUGGING COMMANDS

debugging dhcp server

Syntax	debugging dhcp server { all error event packet }
	undo debugging dhcp server { all error event packet }
View	User view
Default Level	1: Monitor level
Parameters	all: All types of debugging for DHCP server.
	error: DHCP server error debugging.
	event: DHCP server event debugging.
	packet: DHCP server packet debugging.
Description	Use the debugging dhcp server command to enable DHCP server debugging.
	Use the undo debugging dhcp server command to disabled DHCP server
	debugging.
	By default, DHCP server debugging is disabled.

Table 138 Description on the fields of the debugging dhcp server packet command

Field	Description
Rx/Tx	Receiving/sending operation
Interface InterfaceName	Receiving interface
Message type: MessageType	DHCP message type, that is, request or reply.
Hardware type: HardwareType	Hardware type of the DHCP client
Hardware address length:	Hardware address length of the DHCP client
HardwareAddressLength
Hops: Hops	Hops that a DHCP message traveled
Transaction ID: TransactionID	A random number generated when the DHCP client
	initiates an application, which uniquely identifies an
	application process.
Seconds: Seconds	Time elapsed since the DHCP client initiated the
	application. It is not used currently, and its value is set
	to 0.