3Com MSR 50, MSR 30 manual Input numbering plan, Output numbering plan, 2637

2637

Table 690 Input numbering plan

Numbering plan	Description
isdn	ISDN telephone numbering plan
national	National numbering plan
private	Private numbering plan
reserved	Reserved numbering plan
telex	Telex numbering plan
unknown	Unknown numbering plan

output-numbering-plan: Numbering plan for an output number involved in number substitution. For the values, see Table 691.

Table 691 Output numbering plan

Numbering plan	Description
data	Data numbering plan
isdn	ISDN telephone numbering plan
national	National numbering plan
private	Private numbering plan
reserved	Reserved numbering plan
telex	Telex numbering plan
unknown	Unknown numbering plan

Description Use the rule command to configure a number substitution rule.

Use the undo rule command to remove a specified number substitution rule or all number substitution rules.

By default, no number substitution rule is configured.

After you create a number substitution rule list successfully, you need to use this command to configure specific number-substitute rules for it.

Related command: substitute (voice dial program view), number-substitute,first-rule, and dot-match.

Example # Configure number substitution rules for number substitution rule list 1.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] number-substitute 1

#Configure number substitution rule 1 for number substitution rule list 1 as follows:

■Input number: 91

■Output number: 1

[Sysname-voice-dial-substitute1] rule 1 ^91 1