3Com MSR 30, MSR 50 manual Multicast load-splitting, Multicast longest-match

1340 CHAPTER 87: MULTICAST ROUTING AND FORWARDING CONFIGURATION COMMANDS

multicast load-splitting

Syntax multicast load-splitting { source source-group }

undo multicast load-splitting

View System view, VPN instance view

Parameter source: Specifies to implement per-source load splitting.

source-group: Specifies to implement per-source and per-group load splitting simultaneously.

Description Use the multicast load-splittingcommand to enable load splitting of multicast traffic.

Use the undo multicast load-splittingcommand to disable load splitting of multicast traffic.

By default, load splitting of multicast traffic is disabled.

Example # Enable per-source load splitting of multicast traffic in the public instance.

<Sysname> system-view

[Sysname] multicast load-splitting source

# Enable per-source load splitting of multicast traffic in VPN instance mvpn.

<Sysname> system-view

[Sysname] ip vpn-instance mvpn

[Sysname-vpn-instance-mvpn] multicast load-splitting source

multicast longest-match

Syntax multicast longest-match

undo multicast longest-match

View System view, VPN instance view

Parameter None

Description Use the multicast longest-matchcommand to configure route selection based on the longest match, namely based on the mask length.

Use the undo multicast longest-matchcommand to remove the configuration of route selection based on the longest match.

By default, routes are selected according to the order of route entries.