3Com MSR 30, MSR 50 manual Display vrrp ipv6 statistics, Vrrp ipv6 vrid track command

2238 CHAPTER 147: VRRP CONFIGURATION COMMANDS FOR IPV6

<Sysname> display vrrp ipv6 verbose
IPv6 Standby Information:
Run Method	: VIRTUAL-MAC
Virtual IP Ping : Enable
Interface	: Ethernet1/0
VRID	: 1	Adver. Timer	: 100
Admin Status	: UP	State	: Master
Config Pri	: 100	Run Pri	: 100
Preempt Mode	: YES	Delay Time	: 0
Auth Type	: NONE
Track IF	: Ethernet1/1	Pri Reduced	: 10
Virtual IP	: FE80::1
Virtual MAC	: 0000-5e00-0201
Master IP	: FE80::20F:E2FF:FE00:1234
Table 590 Description on the fields of the display vrrp ipv6 command
Field	Description
Run Method	Current VRRP running mode, real MAC or virtual MAC
Virtual IP Ping	Whether you can ping the virtual IPv6 address
Interface	Interface to which the standby group belongs
VRID	Number of the standby group
Adver. Timer	VRRP advertisement interval in centiseconds
Admin Status	Administrative state: UP or DOWN
State	Status of the router in the standby group, master, backup, or initialize
Config Pri	Configured priority
Run Pri	Running priority
Preempt Mode	Preemption mode
Delay Time	Preemption delay
Auth Type	Authentication type
Track IF	The interface to be tracked. It is displayed only after the execution of the
	vrrp ipv6 vrid track command.
Pri Reduced	The priority value that is reduced when the interface being tracked is
	down.
	It is displayed only after the execution of the vrrp ipv6 vrid track
	command.
Virtual IP	Virtual IPv6 addresses of the standby group
Virtual MAC	Virtual MAC address corresponding to the virtual IPv6 address of the
	standby group. It is displayed only when the router is in the state of
	master.
Master IP	Primary IPv6 address of the interface to which the router in the state of
	master belongs

display vrrp ipv6 statistics

Syntax display vrrp ipv6 statistics [ interface interface-typeinterface-number[ vrid

virtual-router-id ] ]

View Any view