Fujitsu IRMC S2/S3 Configure the iRMC S2/S3iRMC, S2/S3 e.g. update firmware or, Change IP address

	Main menu of the Remote Manager
Service Processor...	Configure the iRMC S2/S3iRMC
	S2/S3 (e.g. update firmware or
	change IP address)
	(see section "Service processor - IP
	parameters, identification LED and
	iRMC S2/S3 reset" on page 339).
Change password	Change the password
	(see section "Change the password"
	on page 332).
Console Redirection (EMS/SAC)	Text console redirection
	(see section "Console Redirection
	(EMS/SAC) - Start text console
	redirection" on page 340).
Start a Command Line shell...	Start a command line shell
	(see section "Start a Command Line
	shell... - Start a SMASH CLP shell" on
	page 340).
Console Logging	Redirect output of messages to the
	text console
	(see section "Console Logging -
	Redirect message output to the text
	console (serial)" on page 341).
Table 8: Main menu of the Remote Manager

iRMC S2/S3 329