Fujitsu IRMC S2/S3 manual Using a low bandwidth, Parallel AVR sessions

Using AVR

5.2.1Using a low bandwidth

In the case of a reduced data transfer rate, you can configure a lower bandwidth (bits per pixel, bpp) in terms of color depth for your current AVR session (see page 109).

5.2.2Parallel AVR sessions

AVR can be used by two user sessions simultaneously. One user has full control over the server (full-control mode) and the other can only passively observe keyboard and mouse operation of the server (view only mode).

When AVR is first started, you are initially in view only mode. You will always be asked if you want to switch to full-control mode. If you decide to switch to full- control mode and another full-control mode session is already active, the existing session is switched to view-only mode.

iRMC S2/S3 89