Fujitsu IRMC S2/S3 manual Proceed as follows, Server management software triggers a system reset

Server Management Information - Configuring the server settings

Proceed as follows:

ÊCheck or uncheck the option(s) under Enabled for the Software Watchdog and/or Boot Watchdog.

ÊIf you have activated either of these options, you can configure the following settings after Software Watchdog and/or Boot Watchdog:

Continue

No action is performed when the watchdog has expired, i.e. the server continues to run. An entry is made in the event log.

Reset

The server management software triggers a system reset.

Power Cycle

The server is powered down and immediately powered up again.

ÊAs appropriate, enter the time (in minutes) after which this action is to be performed following after timeout delay.

IThe boot watchdog must wait until the system has been started. You therefore have to specify a sufficient period for after timeout delay (1 - 100).

ÊClick Apply button.

The configured settings are saved and the actions which have been configured are performed in the appropriate circumstances.

236 iRMC S2/S3