Fujitsu IRMC S2/S3 manual Console redirection is terminated after the Bios Post phase

Configuring text console redirection via LAN

Mode

This setting affects the behavior of console redirection while the operating system is running (after the POST phase has completed) - see section "Using console redirection while the operating system is running" on page 55:

Standard

Console redirection is terminated after the BIOS POST phase.

Enhanced

Console redirection continues to be available after the BIOS POST phase.

ÊMake the following settings in the TrustedCore setup utility:

Figure 12: Console Redirection menu (as it appears in the TrustedCore setup utility)

Com Port Address

Set the value to On-board COM A.

Baud Rate

Specify the baud rate.

Console Type

Leave this setting unchanged. (The setting depends on the terminal type used.)

iRMC S2/S3 51