Fujitsu IRMC S2/S3 manual Time LSB first

IPMI OEM Commands supported by the iRMC S2/S3

01 20 - Set Next Power On Time

This command switches on a system at the given time independent of the stored On/Off times in the Configuration Space.

IThe command takes effect only once.

You cancel a “Power On” time previously set with a 01 20 command by specifying the “Power On” time “0” in a subsequent 01 20 command.

Request Data	-	B8	NetFnlLUN: OEM/Group
	-	01	Cmd : Command Group Communication
	1:3	80 28 00 IANA-Enterprise-Number FTS, LS byte first
	4	20	Command Specifier
	5	00	Object ID
	6:7	00 00	Value ID
	8	04	Data Length
	9:12	Time (LSB first) (see below)
Response Data	-	BC
	-	01
	1	Completion Code
	2:4	80 28 00 IANA-Enterprise-Number FTS, LS byte first

Time (LSB first)

Time (UNIX-specific format) when the system switches on again. Time is NOT stored in non-volatile memory. Resolution is 1 minute. After the system has switched on, Time is set to 0 internally.

If Time == 0, the system is not switched on.

392 iRMC S2/S3