iRMC S2/S3 299
Console Redirection - Redirecting the console
ÊClick Enter Console.
You are then connected to the console and can execute the required
command, either by entering it directly in the console area or by clicking it in
the Command drop-down list (IPMI commands only):
Figure 181: Entering SAC or IPMI commands at the console.
ÊTo close the connection to the console, click Leave Console.
IPMI command Explanation
Power On Switches the server on.
Power Off Switches the server off.
Reset Completely restarts the server (cold start), regardless of the status of
the operating system.
Power Cycle Powers the server down completely and then powers it up again after
approximately 5 seconds.
Shutdown Graceful shutdown and power off.
AAAA
Select IPMI command and
click.
Enter SAC command directly.
(No confirmation prompt!)
or