136 iRMC S2/S3
Logging into the iRMC S2/S3 web interface
7.1 Logging into the iRMC S2/S3 web interface
ÊOpen a web browser on the remote workstation and enter the (configured)
DNS name (see page 249) or IP address of the iRMC S2/S3.
Different login screens appear depending on whether LDAP access to a
directory service has been configured for the iRMC S2/S3 (LDAP enabled
option, see page 274):
IIf no login screen appears, check the LAN connection (see section
"Testing the LAN interface" on page 47).
– LDAP access to the directory service is not configured for the
iRMC S2/S3 (LDAP enabled option is not activated) and Always use SSL
Login option (see page 274) is not activated:
Figure 62: Login screen for the iRMC S2/S3 web interface (LDAP access not
configured and the “Always use SSL login” option is not selected)
ÊType in the data for the default administrator account.
User name: admin
Password: admin
IBoth the User name and the Password are case-sensitive.
For reasons of security, it is recommended that you create a
new administrator account once you have logged in, and then
delete the default administrator account or at least change the
password for the account (see "User “<name>” Configuration
- User configuration (details)" on page 266).
ÊClick OK to confirm your entries.