Network Settings - Configure the LAN parameters

DNS Settings

The DNS Settings group allows you to activate the Domain Name Service (DNS) for the iRMC S2/S3. This makes it possible to use symbolic DNS names instead of IP addresses for configuring the iRMC S2/S3.

Figure 141: DNS Configuration page - DNS Settings

DNS enabled

Enables/disables DNS for the iRMC S2/S3.

Obtain DNS configuration from DHCP

If you activate this option, the IP addresses of the DNS servers are obtained automatically from the DHCP server.

In this event, up to five DNS servers are supported.

If you do not enable this setting, you can enter up to five DNS server addresses manually under DNS-Server 1 - DNS-Server 5.

DNS Domain

If the option Obtain DNS configuration from DHCP is disabled, specify the name of the default domain for requests to the DNS server(s).

DNS Server 1 .. 5

If the Obtain DNS configuration from DHCP option is disabled, you can enter the names of up to five DNS servers here.

DNS Retries

Number of DNS retries.

DNS Timeout

Timeout (in seconds) for a DNS response.

ÊClick Apply to store the configured settings.

250

iRMC S2/S3

Page 250
Image 250
Fujitsu IRMC S2/S3 Network Settings Configure the LAN parameters DNS Settings, Enables/disables DNS for the iRMC S2/S3