Printronix P5000LJ user manual PTX Linefeed, LPI Adjust, L. /Lines, L. /Inches, Config. Print

Chapter 4 Emulation Menu

PTX Linefeed

•Disable. The default. Linefeed is to be performed as calculated from the bottom of the graphics or barcode, thereby disrupting the vertical text alignment.

•Enable. The Linefeed moves to the next line as calculated from the Top of Form position, thereby retaining vertical text alignment. When printing graphics or bar codes, you may want to set the PTX Linefeed parameter to Enable to maintain text alignment.

PTX Linefeed Enabled

LINE 1
LINE 2	Linefeed
LINE 3

PTX Linefeed Disabled

LINE 1

LINE 2

Linefeed

LINE 3

	LPI Adjust
	This parameter lets you specify the lines per inch (lpi) values: 6 LPI (the
	default) or 8 LPI.
	Page L. /Lines
	This parameter lets you set physical page length in lines from 12 to 96 at 6 lpi,
	or 16 to 128 at 8 cpi. The default is 66 lines at 6 lpi.
Note	If 6 lpi is selected, you will be able to scroll the menu to 128 (an invalid
	length). However, when you press ENTER to select this value, the menu
	will return with the maximum lines for 6 lpi (i.e., 96 lines). Similarly,
	selecting too few lines for 8 lpi will cause the menu to return with 16 lines.
	Page L. /Inches
	This parameter allows you to set physical page length from 2 to 16 inches, in
	increments of half an inch. The default is 11 inches.
	Config. Print
	This option prints the emulation's parameters and the currently selected
	values.

84