IGP/PGL Emulation
103
Define CR Code (Carriage Return)
This parameter forces the printer to insert an automatic Line Fee d code into
the data stream whenever a Carriage Return code occurs. This is to be used
only if the host computer does not send Line Feeds to the printe r.
•CR = CR. Does not perform a line feed. The next print position will be
print position 1 of the current line.
•CR = CR + LF. Performs an automatic line feed. The next print po sition
will be print position 1 of the next line.
Define LF Code (Line Feed)
This parameter forces the printer to insert an automatic Carriage Return code
into the data stream whenever a Line Feed code occurs. This can be used in
most installations, but it is required if the host comp uter does not send
Carriage Returns to the printer.
•LF = LF. Does not perform an automatic carriage return. The next print
position will be the current print position of the next line.
•LF = CR + LF. Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
Autowrap
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
•Disable. Truncates the text beyond the right margin until a CR or CR + LF
is received.
•Enable. Automatically inserts a CR + LF after a full pri nt line.
Select SFCC
You can specify which decimal code (1-255) will be used as the Special
Function Control Code (SFCC). The factory default setting is 126. The SFCC
denotes that the following data is a PGL command.
PI Slew Range
You can specify how many lines the paper will feed.
•16. A paper slew of 0-15 will move 1-16 lines.
•15. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move
1 line.
CR Edit
This parameter determines if a carriage return will be followe d by a line feed.
•Disable. The printer ignores all carriage returns that are no t followed by
line feeds.
•Enable. The printer processes all carriage returns, even for those that ar e
not followed by line feeds.