Set Commands
247
store tcpip tcp access add 192.75.11.25
Add or remove an entry from the NIC TCP access list defi ned by
IPaddress
. If the list has an entry, only this host can print to and
remotely interact with the print server.
store tcpip from default
Set all TCP/IP network settings back to factory defaults.
store tcpip from current
Store all current TCP/IP network settings to flash memory s o they are
retained after a power cycle. This ensures all current settings match what
is stored in flash memory.
Set Commands
These settings alter the current or working settings in m emory only.
Therefore, they will be lost if the NIC is power cycled. To ensure this does not
happen, be sure to issue a save command so the cur rent settings get written
to flash memory.
set date year month day
set date 1997 02 10
Set the current date noting the four-digit
year
, the two-digit
month
from
01 through 12, and the
day
being the number in the month. If the NIC is
reset, this value will be lost so you will need to set the date a gain.
set dest destination name newname
set dest d1prn name laser
Change the current name of the
destination
to a new name as
indicated by
newname
. This
newname
must be nine characters or less or it
will be truncated. These names are case sensitive.
set dest destination backchannel prn [prn]
set dest d1prn backchannel prn
Establish a return path for printer feedback for a given
destination
.
Since the NIC I/O port is bi-directional, however, you will most l ikely use
the same I/O port that the
destination
is currently sending jobs to.
set dest destination model modelname
set dest d1prn model m4
Associate a model with a destination. Jobs sent to the n amed
destination
are processed according to the options defined in the
named model.
set dest destination logpath logpathname
set dest d1prn logpath l4
Associate a logpath with a destination. Jobs sent to the nam ed
destination
are logged according to the settings defined in the named
logpath.
set dest destination service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd]
set dest d1prn service -netbios