Printronix P5000LJ user manual FF Valid at TOF, Alt. Char Set, CPI Condensed

Chapter 4 Emulation Menu

Auto LF

This option defines the printer actions when print data is received past the forms width setting.

•Enable. Performs an automatic carriage return and line feed when data is received past the forms width.

•Disable. Discards any data past the forms width.

Define LF Code

•LF = LF. Does not perform an automatic carriage return when a line feed command is received. The next print position will be the current print position of the next line.

•LF = CR + LF. Forces an automatic carriage return with each line feed command received. The next print position is print position 1 of the next line.

FF Valid at TOF

•Enable. Performs a form feed when the host sends a Form Feed command and the printer is at the top of form.

•Disable. Will not perform a form feed when the host sends a Form Feed command and the printer is at the top of form.

Character Set

Specifies a character set as shown in the menu. To use one of these sets, choose the desired character set and press ENTER. The desired set will be marked with an asterisk to indicate your selection.

Alt. Char Set

This option determines if data in the range of hex 80 through hex 9F should be interpreted as a control code or as a printable character.

•Set 1. Interprets data in the range of hex 80 through hex 9F as a control code.

•Set 2. Prints data for the characters at hex locations 03, 04, 05, 06, 15, and 80 through 9F.

20 CPI Condensed

Condensed print characters are narrower than the normal character set. This is helpful for applications for which you need to print the maximum amount of information on a page.

•Enable. Prints characters about 60 percent the width of normal characters when condensed print is chosen by the host computer.

•Disable. Does not condense print widths, even if condensed print is chosen by the host.

94