P-Series Emulation
91
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (AC K). You can
select an alternate line spacing of 6, 8, or 10.3 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code hex 08 (BS) . You can
define the code to output an elongated character or a bac kspace.
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additi onal Line Feed
code (hex 0A) into the data stream. Do not use this feature if the hos t
computer sends Line Feeds to the printer.
•CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
The next print position will be print position 1 of the ne xt line.
Auto LF
This option defines the printer action when print data is received past the
forms width setting.
•Disable. Discards any data past the forms width.
•Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
Overstrike
This option enables you to print bold characters.
•Enable. Turns on bold print. When enabled, overstrike printing slows
down the printer.
•Disable. Turns off bold print.
Define LF Code
•LF = CR + LF. Forces an automatic carriage return with each line feed
command. The next print position is print position 1 of th e next line.
•LF = LF. Does not perform an automatic carriage return. The next print
position will be the current print position of the next line.